安裝方式	半固定式模具
產地	河北
認證	ISO9001
銷售方式	直銷
執行質量標準	國標
工藝類型	沖壓成型模
貿易屬性	促銷
發貨期限	7天
品牌	建信模具
打樣周期	2-3天

防撞墻鋼模板已成為制造防撞墻的重要工具,。防撞墻如同城市標志，位于道路兩側,，用于將非機動車道與同向行駛的機動車道分開,，以避免非機動車輛受傷，讓車輛平穩行駛,，確保人員和車輛的,。還有一些是放置在高速公路上交通事故多發的地方，隔離大型車輛,，減少交通事故傷害,，減少車輛碰撞的影響。

制作時會根據圖紙來加工,，這樣可以快速的加工出所需的防撞墻鋼模板,，加工時整個板材可以用切割機進行切割，有一些細節可以用激光切割,。焊接時應注意界面,，以盡量減少焊接接頭的飛濺,。焊接完后，檢查模板的尺寸,，然后繼續將水平和垂直鋼筋焊接在面板上,，這樣**形成了一套防撞墻模板，再進行簡單連接,，涂上保護劑**可以運送個客戶了,。


The steel formwork of anti-collision wall has become an important tool for manufacturing anti-collision wall. The anti-collision wall, like a city sign, is located on both sides of the road to separate the non motor vehicle lane from the motor vehicle lane running in the same direction, so as to avoid injury to non motor vehicles



The vehicle runs smoothly to ensure the safety of personnel and vehicles. Others are placed in places with frequent traffic accidents on the expressway to isolate large vehicles, reduce traffic accident injuries and reduce the impact of vehicle collisions.




When making, it will be processed according to the drawings, so that the required anti-collision wall steel formwork can be processed quickly. During processing, the whole plate can be cut by cutting machine, and some details can be cut by laser. Pay attention to the welding boundary



Surface to minimize spatter of welded joints. After welding, check the size of the formwork, and then continue to weld the horizontal and vertical reinforcement on the panel, so as to form a set of anti-collision wall formwork, and then conduct simple connection and coating



With a protective agent, you can ship a customer.