品牌 :

伯朗特

    什么是塑膠機機械手什么是塑膠機機械手,？塑膠機機械手又名注塑機機械手，是指用于各塑膠行業代替人工完成塑膠取出動作的機械手影響注塑行業專用機械手生產誤差..,，嘉興可調伯朗特機械手.現在很多機械設備生產廠家,，都在選擇用注塑行業專用機械手作為主要生產方式，嘉興可調伯朗特機械手,，生產中使用自動化機械手能夠提伺服機械手的易損配件有哪些伺服機械手是注塑行業所用機械手較多的一種,，如單軸伺服機械手,、三軸伺服機械手，嘉興可調伯朗特機械手,、五軸伺服機械手及大型伺服注塑行業的機械手常見故障排除隨著工業自動化的快速發展,，傳統的注塑行業也慢慢地使用了注塑機械手來代替人工作來，而在實踐操作中如說是注塑機械手如何調整伺服位置眾所周知,，隨著工業自動化的快速發展,，傳統的注塑行業使用機械手越來越***，而其機械手系統調整伺服位置操如何正確使用三軸機械手隨著人們生活水平的提高,，隨著工業化水平的提升,，三軸機械手在很多工廠里使用了起來。

三軸伺服橫走式機械手BRTM系列機械手臂適用150T-380T的各型臥式射出成型機,，手臂形式是雙截式,，分3軸及5軸AC伺服驅動。取出時間1.2sec,，全循環6sec應用于快速取出或是模內貼,、模內鑲件等特殊產品應用。華成三/五軸專用 CANOPEN總線通訊方式信號線少,，遠距離通訊,，擴展性能好，抗干擾能力強,，重復定位精度高,，可以同時控制多軸，設備維護簡單,，故障率少,。

BRTM Series is applicable to all types of horizontal injectionmachine ranges of 150T-380T for take-out products and sprues

Vertical arm is telescopic stage. Full AC servo motor driven oneach axis, Products take-out at supernlgh-speed (1. 2sec. )and drycycle time within seconds, applicable to take-out products withshort forming cycle or complex automatic. Also with the function of

mold labeling and mold inserting

HC three-axis/five axis CANOPEN connecting way.

Less connecting line. long distance communication, good

expansibility

strong anti-interference ability, high repeat

precision, can simultaneously control multi axis, simple equipmentmaintenance, low failure rate.

五軸橫走式機械手BRTR系列機械手臂適用100T-250T的各型臥式射出成型機，手臂形式是單截式,，分3軸及5軸AC伺服驅動,。取出時間1sec，全循環6sec應用于快速取出或是模內貼,、模內鑲件等特殊產品應用,。華成三/五軸專用 CANOPEN，總線通訊方式:信號線少,，遠距離通訊,，擴展性能好，抗干擾能力強,，重復定位精度高,，可以同時控制多軸，設備維護簡單,，故障率少,。

BRTR Series is applicable to all types of horizontal injection machineranges of 100T-250T for take-out products and sprues Vertical arm issingle stage. With types of three-axis and five-axis driven by AC servomotor Products take-out at super high-speed(1sec. )and dry cycle timewithin seconds, applicable to take-out products with short formingcycle or complex automatic. Also with the function of mold labeling and

mold inserting

HC three-axis/five axis CANOPEN connecting way

Less connecting line, long distance communication, good expansibilility,strong anti-interference abilility, high repeat precision, cansimultaneously control multi axis, simple equipment maintenance, low

failure rate