| 出水溫度 | - |
|---|---|
| 工作壓力 | - |
| 回水溫度 | - |
| 結構 | - |
| 燃料 | - |
| 燃料耗量 | - |
| 燃燒方式 | - |
| 適用燃料 | - |
| 循環方式 | - |
| 煙囪口 | - |
| 蒸發量 | - |
| 蒸汽溫度 | - |
| 鍋爐用途 | 多用途 |
再生膠動態脫硫罐主要用于將粉末狀硫化膠與軟化劑,、活化劑及水等置于罐內,，在連續攪拌下密閉加熱,，以使膠粉達到均勻有效膠硫目地,，是采用高溫動態脫硫新工藝的關鍵設備,。
This product is used for that in order to reach even and effective desulfidation for rubber powder, put pulverous crosslinked rubber, softener, activator and water into the pot ,heat hermetically and mix contlnuously, adopted key equipment for the technology of high temperature dynamic desulfidation.
該產品為臥式II類壓力容器,，用導熱油加熱,。罐口開關門有全自動和手動二種形式供用戶選擇,。罐體上部為加料口,、下部為出料口。全自動動態罐開關門由液壓控制,。手動動態罐開關門采用人工機械錯口手動開關門,，以上兩種動態罐均與零壓開關連鎖，確保安全,。攪拌器由JZQ系列減速器通過雙排鏈輪傳動或直給式轉動,，正反轉可自動控制,。攪拌漿形式為帶狀與附壁組合式。壓力容器部件按GB150-98《鋼制壓力容器》標準設計,、制造,。由河北省鍋爐壓力容器監督檢測所監檢驗收。
This product is a horizontal pressure vessel Type II, heats up with the heat conduction oil. Customers could select two ways-automatic and manual operation for pot gate opening and closing. Upside of the pot is charge port, and downside is discharge port. Full auto-dynamic pot opening and closing gate is controlled by hydraulic pressure. Adopt manual mechanical alternate out hand opening and closingate for the manual dynamic opening and closing gate. Above two dynamic pots are linked to the zero pressures witch to ensure safety. Adopt JZQ series reducer through douole row chain wheel rotating or direct driving for the blender, positive and negative rotating could be controlled automatically. The shape of mixing propeller is assorted of ribbon and mural. The parts of pressure vessel are designed and manufactured according to BG150-98 “Steel Pressure Vessel” and have been inspected examination and approved by. Hebei province Technology Inspection Office of Boiler and Pressure Vessel.
| 參數 Parameter 內容Content | 型號 Model | ||||||
| ZT─3.3R | ZT─4.5R | ZT—6R | ZT—8R | ||||
| 容器設計壓力Design Pressure | 2.1Mpa | 2.1Mpa | 2.1Mpa | 2.1Mpa | |||
| 容器工作壓力Working Pressure | 1.8Mpa | 1.8Mpa | 1.8Mpa | 1.8Mpa | |||
| 容器設計溫度Design Temperature | 2170C | 2170C | 2170C | 2170C | |||
| 容器工作溫度Working Temperature | 2120C | 2120C | 2120C | 2120C | |||
| 夾套設計溫度 Jacket Design Temperature | 3000C | 3000C | 3000C | 3000C | |||
| 夾套工作溫度jacket working temperature | ﹤3000C | ﹤3000C | ﹤3000C | ﹤3000C | |||
| 有效容積Active Volume | 3.0m3 | 4.5m3 | 6m3 | 8m3 | |||
| 攪拌器轉速Rotate Speed of Blender | 16r/min | 16r/min | 15r/min | 15r/min | |||
| 夾套容積Jacket Volume | 0.72m3 | 1.04m3 | 1.6m3 | 1.8m3 | |||
| 夾套設計壓力Design Pressuer of Jacket | 0.1Mpa | 0.1Mpa | 0.1Mpa | 0.1Mpa | |||
| 夾套工作壓力Working Pressure of Jacket | 常壓 | 常壓 | 常壓 | 常壓 | |||
| 加熱方式Heating Method | 導熱油 Heat conduction oil | ||||||
| 換熱面積Hear Exchange Area | 8.18m2 | 12.55m2 | 15m2 | 17m2 | |||
| 電機功率Motor Power | 15kw | 18.5kw | 18.5kw | 18.5kw | |||
動態脫硫罐性能參數：
| 參數 Parameter 內容Content | 型號 Model | |||||
| ZT─3.3R | ZT─4.5R | ZT—6R | ZT—8R | |||
| 容器設計壓力Design Pressure | 3.0Mpa | 3.0Mpa | 3.0Mpa | 3.0Mpa | ||
| 容器工作壓力Working Pressure | 2.85Mpa | 2.85Mpa | 2.85Mpa | 2.85Mpa | ||
| 容器設計溫度Design Temperature | 2350C | 2350C | 2350C | 2350C | ||
| 容器工作溫度Working Temperature | 2300C | 2300C | 2300C | 2300C | ||
| 夾套設計溫度 Jacket Design Temperature | 3000C | 3000C | 3000C | 3000C | ||
| 夾套工作溫度jacket working temperature | ﹤3000C | ﹤3000C | ﹤3000C | ﹤3000C | ||
| 有效容積Active Volume | 3.0m3 | 4.5m3 | 6m3 | 8m3 | ||
| 攪拌器轉速Rotate Speed of Blender | 16r/min | 16r/min | 15r/min | 15r/min | ||
| 夾套容積Jacket Volume | 0.72m3 | 1.04m3 | 1.6m3 | 1.8m3 | ||
| 夾套設計壓力Design Pressuer of Jacket | 0.1pa | 0.1Mpa | 0.1Mpa | 0.1Mpa | ||
| 夾套工作壓力Working Pressure of Jacket | 常壓 | 常壓 | 常壓 | 常壓 | ||
| 加熱方式Heating Method | 導熱油 Heat conduction oil | |||||
| 換熱面積Hear Exchange Area | 8.18m2 | 12.55m2 | 15m2 | 17m2 | ||
| 電機功率Motor Power | 15kw | 18.5kw | 18.5kw | 18.5kw | ||
動態脫硫罐性能參數：
| 參數 Parameter 內容Content | 型號 Model | |||||
| ZT─3.3R | ZT─4.5R | ZT—6R | ZT—8R | |||
| 容器設計壓力Design Pressure | 4.0Mpa | 4.0Mpa | 4.0Mpa | 4.0Mpa | ||
| 容器工作壓力Working Pressure | 3.65Mpa | 3.65Mpa | 3.65Mpa | 3.65Mpa | ||
| 容器設計溫度Design Temperature | 2520C | 2520C | 2520C | 2520C | ||
| 容器工作溫度Working Temperature | 2460C | 2460C | 2460C | 2460C | ||
| 夾套設計溫度 Jacket Design Temperature | 3000C | 3000C | 3000C | 3000C | ||
| 夾套工作溫度jacket working temperature | ﹤3000C | ﹤3000C | ﹤3000C | ﹤3000C | ||
| 有效容積Active Volume | 3.0m3 | 4.5m3 | 6m3 | 8m3 | ||
| 攪拌器轉速Rotate Speed of Blender | 16r/min | 16r/min | 15r/min | 15r/min | ||
| 夾套容積Jacket Volume | 0.72m3 | 1.04m3 | 1.6m3 | 1.8m3 | ||
| 夾套設計壓力Design Pressuer of Jacket | 0.1Mpa | 0.1Mpa | 0.1Mpa | 0.1Mpa | ||
| 夾套工作壓力Working Pressure of Jacket | 常壓 | 常壓 | 常壓 | 常壓 | ||
| 加熱方式Heating Method | 導熱油 Heat conduction oil | |||||
| 換熱面積Hear Exchange Area | 8.18m2 | 12.55m2 | 15m2 | 17m2 | ||
| 電機功率Motor Power | 15kw | 18.5kw | 18.5kw | 18.5kw | ||
