| 分類 : | 丁腈軟膠 | 型號 : | 3365 |
| 品牌 : | 勝浩橡塑 | 特性： : | 注塑級 |
| 特性1： : | 耐油 |
高硬度橡膠料BR-95A 勝浩橡塑 NBR膠粒 我公司長期出售NBR耐油橡膠粒:有各種硬度值50A,、60A、70A、80A、90A、95A，主要有本色和黑色兩種。
| NBR橡膠顆?！⑺芗?jí)物性參數 | |||||
| 性能 | 測試條件 | 典形數據 | 單位 | 測試方法 | 備注 |
| Properties | Test Condition | Typical value | Unit | Test Method | |
| 熔融流動速度 | 190℃/2.16Kg | 5.4 | g/10min | ASTM D1238 | |
| Melt Flow Rate | |||||
| 比重 | 25℃ | 0.97 | NA | ASTM D792 | |
| Specific Gravity | |||||
| 邵氏硬度 A | 25℃/5 Sec. | 95 | A | ASTM D2240 | |
| Shore Hardness A | |||||
| 拉伸強度 | 25℃/500 mm/min | 9.27 | Mpa | ASTM D412 | |
| Tensile Strength | |||||
| 極性延伸率 | 25℃/500 mm/min | 353 | % | ASTM D412 | |
| Ultimate Elongation | |||||
| 拉伸應力 | 25℃/500 mm/min | 7.86 | Mpa | ASTM D412 | |
| Tensile Stress @ 100? ?% | |||||
| 撕裂強度 | 25℃/500 mm/min | 31.7 | N/mm | ASTM D624 | |
| Tear Strength | |||||
| 壓縮長久變形 | 70℃/22Hrs | 68 | % | ASTM D395 B | |
| Compression Set | |||||
| 干燥條件/Drying Condition | |||||
| 80℃?-100℃?/2-4小時Hrs | |||||
| 工藝參數/Processing Conditions | |||||
| 機筒溫度 | 料筒前段 | 料筒中段 | 料筒后段 | 料筒噴嘴 | |
| Barrel temperature | Front section | Middle section | Rear section | Nozzle | |
| 溫度 | 180℃-190℃ | 190℃-210℃ | 200℃-210℃ | 180℃-190℃ | |
| Temperature | |||||
| *以上數據和資料僅作參考之用。所有數據是由我方實驗所得的真實數據并相信其準確性.不過,以上數據和資料不能保證可引伸至使用者,使用者應自行測試加以確認,。 | |||||
| *The data & information here are for reference only. All data were generated in our laboratory and are true and trustable. However, these would not be guaranteed as sales specifications and the user should evaluate the suitability to their final applications. | |||||
溫馨提示您:
因本頁面展示有限無法完全描述產品更多相關信息,；塑膠原料行情每天每時波動較大無法及時更新，請親們理解,！
產品信息和近期價格請您及時來電,！
